ALFA WiFi USB models Now support MAC 10.11 EI Capitan

ALFA WiFi USB models Now support MAC 10.11 EI Capitan

Supported Model:
AWUS036NHR v2, AWUS036NHV, AWUS036EAC, AWUS036AC, AWUC036ACH, U24N,
Tube-UV, UBDo-UV
Download Link: Here

 

Author: ALFA Network Inc.

ALFA Network Inc. https://www.alfa.com.tw

42 thoughts

  1. There are plenty factors for the symptom on your side. Is the \”Unavailable\” symptom occurred after firmware upgrade? Can you please use a Ethernet cable to connect to R36 LAN port for machine access? How about the LED status of the R36 on your side? Please kindly send more detail descriptions for further analysis.

    Like

  2. Hi, thereI installed drivers for AWUS036NHR v2 on 10.11.1all works fine, but i cant get dhcp adressVia internal wifi card all works finebut with alpha card i see all networks, i could connect to them, but i did not get the ip adress by dhcphow can i fix that?thank you

    Like

  3. There are plenty factors affecting wireless operation/performance, transmission distance, antenna angles, antenna types, antenna direction, settings on the access point, signal-blocking object in-between ….etc. And some of these factors are various from time to time. If the adapter is properly installed and operating properly, try to check the factors one by one to clarify which factor affecting the wireless operation.

    Like

  4. Currently, there is no info of MAC OSX driver update from chipset company' thus we're unable to determine the schedule. Please visit ALFA's website for product updates and relevant news.

    Like

  5. I installed the AWUS036ACH on my Mac IOS 10.11 El Capitan and functioned normally.However I have a virtual machine KALI Linux 2.0 installed on this same computer on VMWARE FUSION does not recognize the AWUS036ACH? What to do?

    Like

  6. Olá This is the result of the ifconfig command given in the MAC:MBP-de-Sergio:~ serfran$ ifconfiglo0: flags=8049 mtu 16384 options=3 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 nd6 options=1gif0: flags=8010 mtu 1280stf0: flags=0 mtu 1280en0: flags=8823 mtu 1500 ether 80:e6:50:0d:4a:ea nd6 options=1 media: autoselect () status: inactiveen1: flags=963 mtu 1500 options=60 ether 72:00:04:f7:05:70 media: autoselect status: inactiveen2: flags=963 mtu 1500 options=60 ether 72:00:04:f7:05:71 media: autoselect status: inactivep2p0: flags=8802 mtu 2304 ether 02:e6:50:0d:4a:ea media: autoselect status: inactiveawdl0: flags=8902 mtu 1484 ether 7e:71:8a:da:c2:43 nd6 options=1 media: autoselect status: inactivebridge0: flags=8863 mtu 1500 options=63 ether 82:e6:50:d0:4e:00 Configuration: id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0 maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200 root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0 ipfilter disabled flags 0x2 member: en1 flags=3 ifmaxaddr 0 port 5 priority 0 path cost 0 member: en2 flags=3 ifmaxaddr 0 port 6 priority 0 path cost 0 nd6 options=1 media: status: inactiveen12: flags=8863 mtu 1500 ether 00:c0:ca:89:32:e5 inet6 fe80::2c0:caff:fe89:32e5%en12 prefixlen 64 scopeid 0xb inet6 2804:d41:edb:1500:2c0:caff:fe89:32e5 prefixlen 64 autoconf inet6 2804:d41:edb:1500:502a:d64b:ca82:8e2d prefixlen 64 autoconf temporary inet 10.146.149.105 netmask 0xffffff00 broadcast 10.146.149.255 nd6 options=1 media: autoselect status: activeMBP-de-Sergio:~ serfran$ Note that the MAC is recognized as an Ethernet network interface and not WIRELESS. Now when I open the VMWARE FUSION and start the KALI and give ifconfig in KALI look what happens!root@viking-kali:˜# ifconfigeth0 Link encap:Ethernet Endereço de HW 00:0c:29:a2:b6:67 inetend.: 10.146.149.112 Bcast:10.146.149.255 Masc:255.255.255.0 ……………………………………….. ………………………………………..l0 Link encap:Loopback Local ……………………………………….. ………………………………………..root@viking-kali:˜# And I'm having access to Internet normally !!! So I need it to be recognized in KALI as wlan0 !! Thank's

    Like

  7. I installed the AWUS036ACH on my MacBook Pro with OS 10.11.4 El Capitan and sometimes the Mac crash with a kernel panic error. Any clue? I downloaded your Mac latest driver from your site on March 2016. Any update to be released and to fix this problem???

    Like

  8. Is the same method and same file for ALFA TUBE2H valid ?What should I do if it is not valid ? For ALFA TUBE2HI want to return the original Firmware to OpenwrtWe are very pleased if you prepare a guideAlso this file missing !!! Please re-upload Hornet-B6-v3.1-0810-r7e2145-BIN

    Like

  9. My firmware update from v3.1-0810 to openwrt-ar71xx-generic-hornet-ub-squashfs-factory.bin went bad and now i can't access to router any way. Any recomendation? Thanks in advance

    Like

  10. Ok, I just found out the solution for my problem. Basically the firmware was correctly installed (apparently) but I had to connect to router through network cable, setup a manual address on my eth0 to 192.168.1.2 and now I can access to it.

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s