ALFA WiFi USB models Now support MAC 10.11 EI Capitan
Supported Model:
AWUS036NHR v2, AWUS036NHV, AWUS036EAC, AWUS036AC, AWUC036ACH, U24N,
Tube-UV, UBDo-UV
Download Link: Here
Supported Model:
AWUS036NHR v2, AWUS036NHV, AWUS036EAC, AWUS036AC, AWUC036ACH, U24N,
Tube-UV, UBDo-UV
Download Link: Here
http://192.168.2.1/ can't access, shows unavailable
LikeLike
GOOD!!!!!
LikeLike
Thanks
LikeLike
There are plenty factors for the symptom on your side. Is the \”Unavailable\” symptom occurred after firmware upgrade? Can you please use a Ethernet cable to connect to R36 LAN port for machine access? How about the LED status of the R36 on your side? Please kindly send more detail descriptions for further analysis.
LikeLike
I can install the factory firmware using a serial cable, which nesesy firmware and need to run commands
LikeLike
I want my ap121u with factory firmware, a tutorial would be good to retrieve serial cable
LikeLike
I HAVE ALFA MODEL AWUS036NH AND MAC 10.11 EI Capitan!What can I do?
LikeLike
I've Alfa AWUS036NH too. Will be released El Capitan driver for this model?
LikeLike
follow this topic it work 100% i have the same alfa awus036nhhttp://www.jamesattard.com/2015/10/ralink-rt5370-usb-wifi-adapter-on-el.html
LikeLike
check the new post step by step to install AWUS036NH to EI Capitan
LikeLike
I have a awus036neh, will this work?
LikeLike
Hi, thereI installed drivers for AWUS036NHR v2 on 10.11.1all works fine, but i cant get dhcp adressVia internal wifi card all works finebut with alpha card i see all networks, i could connect to them, but i did not get the ip adress by dhcphow can i fix that?thank you
LikeLike
Looks like it was a weak signal. I got dhcp adress, trying different antenna types.Strange, because internal wifi works fine
LikeLike
Please refer to the instructions in another blog: http://alfanetworkinc.blogspot.tw/2015/12/mac-os-x-10.htmlThe instructions shall help to install wireless card on your El Capitan.
LikeLike
Probando!
LikeLike
Are there any plans to provide support/drivers for the AWUS036NHA that work without disabling SIP?
LikeLike
I can't wait!
LikeLike
There are plenty factors affecting wireless operation/performance, transmission distance, antenna angles, antenna types, antenna direction, settings on the access point, signal-blocking object in-between ….etc. And some of these factors are various from time to time. If the adapter is properly installed and operating properly, try to check the factors one by one to clarify which factor affecting the wireless operation.
LikeLike
Currently, there is no info of MAC OSX driver update from chipset company' thus we're unable to determine the schedule. Please visit ALFA's website for product updates and relevant news.
LikeLike
Hello I have model AWUS036H I had a go at following the install instructions in the other post regardless, but couldn't get mine to function. Any help?
LikeLike
I installed the AWUS036ACH on my Mac IOS 10.11 El Capitan and functioned normally.However I have a virtual machine KALI Linux 2.0 installed on this same computer on VMWARE FUSION does not recognize the AWUS036ACH? What to do?
LikeLike
Olá This is the result of the ifconfig command given in the MAC:MBP-de-Sergio:~ serfran$ ifconfiglo0: flags=8049 mtu 16384 options=3 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 nd6 options=1gif0: flags=8010 mtu 1280stf0: flags=0 mtu 1280en0: flags=8823 mtu 1500 ether 80:e6:50:0d:4a:ea nd6 options=1 media: autoselect () status: inactiveen1: flags=963 mtu 1500 options=60 ether 72:00:04:f7:05:70 media: autoselect status: inactiveen2: flags=963 mtu 1500 options=60 ether 72:00:04:f7:05:71 media: autoselect status: inactivep2p0: flags=8802 mtu 2304 ether 02:e6:50:0d:4a:ea media: autoselect status: inactiveawdl0: flags=8902 mtu 1484 ether 7e:71:8a:da:c2:43 nd6 options=1 media: autoselect status: inactivebridge0: flags=8863 mtu 1500 options=63 ether 82:e6:50:d0:4e:00 Configuration: id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0 maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200 root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0 ipfilter disabled flags 0x2 member: en1 flags=3 ifmaxaddr 0 port 5 priority 0 path cost 0 member: en2 flags=3 ifmaxaddr 0 port 6 priority 0 path cost 0 nd6 options=1 media: status: inactiveen12: flags=8863 mtu 1500 ether 00:c0:ca:89:32:e5 inet6 fe80::2c0:caff:fe89:32e5%en12 prefixlen 64 scopeid 0xb inet6 2804:d41:edb:1500:2c0:caff:fe89:32e5 prefixlen 64 autoconf inet6 2804:d41:edb:1500:502a:d64b:ca82:8e2d prefixlen 64 autoconf temporary inet 10.146.149.105 netmask 0xffffff00 broadcast 10.146.149.255 nd6 options=1 media: autoselect status: activeMBP-de-Sergio:~ serfran$ Note that the MAC is recognized as an Ethernet network interface and not WIRELESS. Now when I open the VMWARE FUSION and start the KALI and give ifconfig in KALI look what happens!root@viking-kali:˜# ifconfigeth0 Link encap:Ethernet Endereço de HW 00:0c:29:a2:b6:67 inetend.: 10.146.149.112 Bcast:10.146.149.255 Masc:255.255.255.0 ……………………………………….. ………………………………………..l0 Link encap:Loopback Local ……………………………………….. ………………………………………..root@viking-kali:˜# And I'm having access to Internet normally !!! So I need it to be recognized in KALI as wlan0 !! Thank's
LikeLike
Any chance that AWUS036NHA could get drivers for El Capitan?
LikeLike
I installed the AWUS036ACH on my MacBook Pro with OS 10.11.4 El Capitan and sometimes the Mac crash with a kernel panic error. Any clue? I downloaded your Mac latest driver from your site on March 2016. Any update to be released and to fix this problem???
LikeLike
It is a pleasure going through your post. I have bookmarked you to check out new stuff from your side.asp.net training in jalandhar
LikeLike
This comment has been removed by the author.
LikeLike
Sorry, the link to \”Hornet-B6-v3.1-0810-r7e2145-BIN\” is broken.
LikeLike
download link fixed
LikeLike
You have forgotten to add the reverse file from Open WRT back to stock firmware:Hornet-B6-v3.1-0810-r7e2145-BIN
LikeLike
Is the same method and same file for ALFA TUBE2H valid ?What should I do if it is not valid ? For ALFA TUBE2HI want to return the original Firmware to OpenwrtWe are very pleased if you prepare a guideAlso this file missing !!! Please re-upload Hornet-B6-v3.1-0810-r7e2145-BIN
LikeLike
Can it work with ALFA AWUS036NHA?
LikeLike
internet recovery how to update efi firmware bios for Mac This an answer
LikeLike
were to find Hornet-B6-v3.1-0810-r7e2145-WEB upgrade?
LikeLike
The original link above is still alive, here is a copy for those who are unable to access the files, FYI.https://1drv.ms/u/s!Ar9ezZGOfNx6g4A48G400lJmTYk8eg
LikeLike
ty
LikeLike
does it work with ubuntu?
LikeLike
Your link to the firmware is not working, the page shows a 404 error. Incase your not aware!
LikeLike
The ALFA website is upgrading in progress, please contact ALFA support staff if there is tech support needed.
LikeLike
404 not found please help !
LikeLike
My firmware update from v3.1-0810 to openwrt-ar71xx-generic-hornet-ub-squashfs-factory.bin went bad and now i can't access to router any way. Any recomendation? Thanks in advance
LikeLike
Ok, I just found out the solution for my problem. Basically the firmware was correctly installed (apparently) but I had to connect to router through network cable, setup a manual address on my eth0 to 192.168.1.2 and now I can access to it.
LikeLike
Will it work with alfa AWUS036NHA?
LikeLike